Display & Operation
WANDLER Service & Help
WANDLER Display & Operation
On this page, you will find help on operating the WANDLER Display: indicators, battery level, speed, riding modes, button functions, error codes, and common display questions. It serves as a central starting point for display operation and fault diagnosis.
Brief explanation
The display shows central information such as speed, riding status, battery level, and possible error codes. If a display is unclear or an error code appears, you should first note down the code, check for visible abnormalities, and then open the relevant help page.
Important Display Indicators
Speed
km/h display
The speed display shows the current speed while riding. When stationary, the display usually shows 0 km/h.
Battery
Battery level
The battery level gives an indication of the remaining energy. The actual range additionally depends on riding style, temperature, load, tire pressure, and route.
Riding operation
Riding modes & settings
Depending on the model and version, riding modes, riding settings, or assistance displays may be visible on the display.
Fault diagnosis
Error display
If "ERROR" with a number appears at the bottom of the display, use the error code overview for initial assessment.
Operation
Basic Operating Instructions
The exact operation may vary slightly depending on the display version and model year. Therefore, for detailed questions, also use the display manual and the online operating instructions.
Switching on
Before switching on, check that the battery, main switch, and plug connections are correctly connected. The display should start normally after switching on.
Check display
Pay attention to speed, battery level, riding status, and possible warning or error indicators. Unusual displays should be documented.
Do not adjust blindly
Do not change unknown settings if you are not sure of their function. Incorrect settings can lead to malfunctions or unclear displays.
If the display shows an error code
Step 1
Note down code
Note down the exact error number and take a photo of the display. This helps with support and fault diagnosis.
Step 2
Check error code
Open the error code overview and check which cause might match the displayed code.
Step 3
Contact support
If the error persists or you are unsure, contact WANDLER service with a photo and error description.
Typical cases
Frequent Display Questions
Display remains dark
First, check the battery, main switch, plug connections, and visible cable damage. Do not disassemble further if unsure.
Battery level seems inaccurate
The display is an orientation. Voltage, load, temperature, and riding style can influence the display.
Buttons do not react
Check if the display is switched on correctly, no visible moisture is present, and there is no damage.
Error code appears
Open the error code page and check the corresponding error code. Note the error for support.
Relevant Help Pages
Important Note
Do not open any electrical components or change unknown display or controller settings if you are not sure of their function. Work on the battery, controller, wiring harness, motor, or display should only be carried out with sufficient expertise.
Frequently Asked Questions about Display & Operation
What to do if the display shows an error code?
Note down the error code, take a photo of the display, and open the WANDLER error code overview. There you will find the relevant classification and further inspection steps.
Why does the battery indicator fluctuate?
The battery indicator can be influenced by load, temperature, inclines, riding style, and voltage curve. It serves as a guide and does not replace range planning.
Where can I find the detailed display manual?
The detailed display manual can be found in the Repair & Maintenance section. It is also linked on this page.
When should I contact support?
Contact support if an error code persists, the display does not start, readings seem implausible, or you are unsure.
Support
Display problem persists?
If your display is unresponsive, shows an error code, or displays unclear values, contact WANDLER service. Have the model, year of manufacture, a photo of the display, and a brief error description ready.
